strong gel amine catalyst BX405/low odor amine catalyst BX405
Overview:
Product Name: Dabco BX405
Alias: Dabco BX405, low odor strong gel amine catalyst BX405, strong gel amine catalyst BX405, low odor amine catalyst BX405, low odor strong gel catalyst BX405, Dabco BX405 polyurethane catalyst
Product description: low odor catalyst for polyurethane insulation DABCO BX405
Product Physical Properties:
Appearance: colorless liquid
Viscosity(25℃,mPa.s):13
Density (25℃,g/cm3): 0.914
Water solubility: completely soluble in water
Flash point (PMCC,℃): >100
Hydroxyl value (mgKOH/g): 327
Brief introduction.
DABCO BX405 catalyst is a highly efficient polyurethane amine catalyst that strongly catalyzes the reaction between polyol and isocyanate and promotes the formation of urethane esters, thus shortening the post-curing time of polyurethane foam.
DABCO BX405 catalyst offers better post-cure performance than POLYCAT 8 (dimethylcyclohexylamine DMCHA), with catalytic activity comparable to that of POLYCAT 8, as well as better mold release than POLYCAT 8, and flow and K-factor as good as POLYCAT 8. DABCO BX405 can be used in a wide range of rigid polyurethane foam applications DABCO BX405 can be used in various applications of rigid polyurethane foam, such as polyurethane pipe insulation, polyurethane insulation boards, and is particularly suitable for electrical refrigerator formulations.
Typical Physical Properties Table.
Appearance Colorless transparent liquid
Specific gravity 0.914
Viscosity @25℃ mPa.s 13
Water solubility @25℃ completely dissolved
Flash point, ℃ ＞100
Characteristics
Low odor hard foam catalyst, replacing dimethylcyclohexylamine DMCHA
Same fluidity and K-factor as POLYCAT 8.
Better mold release and post cure
Particularly suitable for refrigerator formulations
Suggestions for Use: Dabco BX405 Catalyst
Dabco BX405 catalyst is a low odor, strong gel catalyst that strongly catalyzes the reaction between polyols and isocyanates, resulting in a shorter post-cure time; Compared to dimethylcyclohexylamine DMCHA, Dabco BX405 catalyst has better mold release and post-cure properties, low odor, etc.; Dabco BX405 catalyst can be used in a wide range of polyurethane rigid foams.
Product Usage:
Dabco BX405 is a low-odor, strong-gelling amine catalyst that strongly catalyzes the reaction of polyols with isocyanates, thereby reducing post-cure time;
Compared with dimethylcyclohexylamine, Dabco BX405 has better mold release and post-cure properties, and low odor;
Dabco BX405 can be used in all kinds of polyurethane rigid foam, especially in appliances.
Shelf life.
Keep unopened for two years
Storage and transportation:
Should be kept sealed and stored in a dry, cool and ventilated warehouse
Packing:
200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.
Company?Name: |
Newtop?Chemical?Materials?(Shanghai)?Co.,?Ltd. |
Sales?Manager: |
Hunter |
E_Mail: |
?sales@newtopchem.com |
Telephone: |
86-152 2121 6908 |
Fax: |
86-021-5657?7830 |
Address: |
Rm.?1104,?No.?258,?Songxing?West?Road,
|
Website: |
www.mimgu.com? |
